Alpina Comox

Color:

Size:

Product descripton:

Safe, lightweight, short shield, crass in style. The COMOX is a variable and comfortable helmet for the trail. For every trail. With the COMOX, biking is fun again. The combination of good fit, cool look and lots of protection is the answer to the requirements of a versatile enduro helmet.

The COMOX is well ventilated, which allows the use in the areas of enduro, all-mountain and trial. With the Run System Ergo Flex is a lightweight and comfortable adjustment system installed on the COMOX. The filigree design fits perfectly to the head and thus increases the protection. Among bikers there is the saying that there is no bad day on the bike. With the enduro helmet COMOX this is true.

With its many technologies, it optimally protects your head from injury in the event of an impact.

Features - Comox

3D-Fit: via the 3D-Fit system, the run system at the back of the head can be adjusted in height
Airflow Venting: directs cooling air along the head
Fly Net: the front vents of the helmet are covered with a mesh fabric
Ceramic Shell: break and scratch resistant, UV stable and antistatic
Custom Fit: the optimal fit can be adjusted by a wheel at the back of the head
Edge Protect: increases the durability of the helmet by covering the edges
Ergomatic: closure that can be operated with one hand and remains firmly closed in the event of a fall
Hi-EPS: small air chambers absorb forces in the event of an impact to protect the head
Inmold: the thermal connection between the upper and lower shell makes the helmet light and strong
Run System Ergo Flex: a smooth turning wheel allows you to adjust the helmet size
Shield Protect: the removable shield protects against both splashing dirt and direct sunlight
Y-Clip: guarantees a precise adjustment of the seat position and thus the best possible protection

Technologies

AIR FLOW VENTING
Alpina developers spend a lot of time and energy to constantly improve the ventilation of our cycling helmets. Through wind tunnel tested arrangement of vents, our engineers create a "Venturi" effect inside the helmet that cools the head, leading to less sweat and higher performance.

FLY NET
The front vents of the helmet are covered with a mesh fabric. This performs the same function as an insect screen, preventing insect bites on the scalp during hot and humid riding periods and locations.

CERAMIC SHELL
All Inmold-manufactured helmets from Alpina, receive this shatter and scratch resistant polycarbonate shell. The blank is stretched under high heat to the shape of the later helmet and pressed with high pressure on its Hi-EPS body. The material is characterized by several qualities at the same time: It is break- and scratch-resistant, UV-stable as well as antistatic.

CUSTOM FIT
Different head shapes require a flexible fitting system. In combination with the Run System, Custom Fit ensures a non-slip fit. The neckband at the back of the head can be tilted in several stages and grips the head gently without pressure points.

EDGE PROTECT
Edge Protect is a processing method that ensures Inmold helmets have no sharp edges. This reduces the risk of injury in two ways: on the one hand, it protects the hands when handling the helmet, and on the other hand, in the event of an impact, the neck and shoulder area remain protected from scratches when in contact with the lower edge of the helmet.

ERGOMATIC
Proven hundreds of thousands of times and used in all Alpina bicycle helmets: the well-known belt buckle with red push button and multi-stage automatic detent. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and cannot open itself in the event of a fall.

HI-EPS
The inner shell of every Alpina helmet is made of Hi-EPS ("High Expanded Polystyrene"). It consists of microscopic air chambers, which optimally absorb the forces acting during an impact. Despite optimum protection, HI-EPS ensures extra-thin wall thicknesses and narrow helmet shapes.

INMOLD
In the Inmold production process, the helmet upper shell made of polycarbonate is "baked" together with the EPS granulate of the helmet body under high heat and strong pressure. This creates an extensive and inseparable bond between the upper and lower shells. Advantage: The helmet is very light and at the same time extremely stable.

RUN SYSTEM ERGO Flex
via the Run System, the size of the helmet can be individually adjusted on all helmets from Alpina via a smooth-running rotary wheel. The Run System Ergo Flex is the lightest and most comfortable fitting system from Alpina. The filigree design nestles evenly against the head and thus increases protection. The Run System Ergo Flex can be adjusted via a fine grid - a helmet cannot be adjusted more individually, smoothly and comfortably.

SHIELD PROTECT
The removable shield protects against splashing dirt as well as direct sunlight.

Y-CLIP
A helmet can only protect as well as it remains in the optimum position on impact. The fixation of the two straps under the ear plays a crucial role here. Alpina's "Y-Clip" system guarantees a millimeter-precise adjustment - in seconds.